Contains an EPA Registered Fungicide
Resists Mold Growth on Dry Coated Surfaces
Provides Long Term Protection
Durable, Flexible, and Permeable
100% Acrylic Water-Based Coating
Available in both White and Clear Finishes
Self priming over bare sheetrock, composition board, ceiling tile and concrete.
MOLD RESISTANT COATING
Bioesque Mold Resistant Coating is supplied ready to use but can be thinned sparingly with water (up to 8oz of water per gallon) for proper application consistency if necessary. Apply Bioesque Mold Resistant Coating generously and uniformly by brush, roller, or airless spray. Apply one coat of this coating and ensure that the finished surface is properly sealed. To ensure that the finished surface is properly sealed, two‐ coats may be required on some porous surfaces.
