Description: The FLIR MR160 is the only moisture meter with the power to show you where to measure the problem. Featuring Infrared Guided Measurement (IGM) technology powered by a FLIR Lepton® thermal imaging sensor, MR160 helps you quickly see temperature patterns that point to potential hidden moisture so you know right where to place the meter probe to capture accurate readings.
TROUBLESHOOT QUICKLY
Easily investigate insulation and moisture issues using MR160's pinless technology or external pin probe for both non-destructive and contact measurements.
IDENTIFY AND VERIFY MOISTURE ISSUES WITH ONE TOOL
MR160 is your go-to troubleshooting tool right out of the box: Identify cold spots with the built-in, 80x60-resolution thermal imager to locate areas of moisture. Verify the actual moisture level using the meter's pin and pinless moisture measurement functionality. Capture thermal images and moisture readings on one screen, then generate reports with free FLIR Tools software.
PORTABLE, TOUGH, DURABLE
The rugged design, small form factor, and internal rechargeable battery makes the FLIR MR160 a convenient tool to carry with you wherever you need it.
Model Number
MR160
Thermal Imaging
Thermal Imaging Detector
FLIR Lepton microbolometer
Image Calibration
Automatic
Thermal Image Resolution
4800 pixels (80 × 60)
Spectral Response
8–14 μm
Field of View
51° × 38°
Thermal Sensitivity
< 0.15 °C
Image Frame Rate
9 Hz
Image Display
Color Moisture Alert
Minimum Focus Distance
10 cm (4”)
Moisture Measurement
Pin Moisture via External Probe Range (Accuracy)
0–100% WME (± 5%)
Pin Moisture Groups
9 material groups
Pinless Moisture Range
0–100 relative measurement
Pinless Measurement Depth
0.75" (19mm) Max
Measurement Resolution
0.1
Response Time Pinless
100 ms
Response Time Pin Mode
750 ms
General Information
Display Type
QVGA (320 x 240 pixel) 2.3” 64k color TFT
Saved Image File format
BMP with measurement values overlaid
Stored Image Capacity
9999 images
Laser Orientation
Single laser pointer to center of thermal image
Power Requirements
Integrated rechargable battery
Battery Power - Continuous Run Time / Typical Usage
18 hours max / 4 work weeks
Battery
3.7 V, 3000 mAh Li-ion rechargeable via micro USB
Drop Test
9.8’ (3m)
Certification Standards
EN61326 (EMC), EN61010 (Battery + Charger), EN60825-1 Class 2 (Laser)